11 "Faux Pas" That Are Actually OK To Create With Your Saab Key

· 4 min read
11 "Faux Pas" That Are Actually OK To Create With Your Saab Key

Replacement Keys For the 03-11 Saab 9-3

It is important to replace your car keys immediately if you lose them. This can help you save cash in the long run. Many owners of the 03-11 Saab 9-3 have trouble finding an authorized source for replacement keys.

Making another key for your Saab isn't as difficult as you might think. You'll need a flathead and patience.

Replacement cases for the SAAB 9-3 key fob

Saab owners should always carry at least one spare key for their vehicles as losing the one working key can cost a great deal. Although it is easier to copy a traditional car key, Saab's modern keys have an immobilizer that only the owner knows how to disable. The key is a small electronic device that connects to the car's computer and it is equipped with a chip that is unique to every car.

Fortunately, replacing the case to fit a Saab 9-3 key fob is an easy task that doesn't require any special tools. All you need is a flathead screwdriver to open the case. Be careful not to scratch any electronic components. After the case has been removed, you can replace the battery and rebuild the SAAB 9-3 key fob.

You can buy a replacement case online for your vehicle key fob, but beware of products advertised for this model. These items may not be compatible with your vehicle since they are not SAAB-approved. In addition, they could cause irreparable damage or destruction to the electronic components in your car. Instead, look for genuine Saab parts that are sourced from trusted suppliers. This will ensure that your replacement part is of the top quality. The best thing to do is to locate a local locksmith that specializes in Saab.

The emergency key must be removed from the SAAB 9-3 key fob

The 03-11 SAAB 9-3 was a stunning car, and lots of them are seen around the world. Key fobs are a frequent issue for this model. It tends to wear easily. However, there is an easy and cheap solution to this issue. Simply replace the case of your SAAB 9-3 key fob, and it'll look new!

The SAAB key fob is an electronic remote control that includes a manual key to open the doors and to start the engine. It is easy to create duplicates of this key, but it is a lot more difficult to duplicate the electronic component. This is because the electronic components inside these keys are protected by an exclusive chip that prevents anyone from trying to copy them without a Saab-approved tool, which is called a Tech-2.

A dealer can also add an additional key to the price of Saab but the price is several hundred dollars. This is due to the fact that it requires a new CIM Module and a key with electronics. You will save money if you remove the emergency key and then reprogram it. To do this, insert a flathead screwdriver into the slot that is located in the middle of the case and gently push it open.

How do you change the battery in a SAAB 9-3 keyfob

Losing your car keys or lost can be a frustrating experience. If you must go to the dealer, it can be costly. If you have a spare, AutoLocks LTD will provide you with a new key for an amount that is 65% lower than the dealer's price.

Switching the battery on the SAAB 9-3 key fob is fairly simple. First, you need to remove the emergency key. You can do this by pressing the blue button on the key fob. You can then remove the emergency key by pressing the blue button on your key fob. Be sure not to spray the emergency key with liquids. This could damage the electronic components.

The next step is to take off the plastic cover on the back of the key fob. You can do this using the aid of a screwdriver. After removing the cover, you'll be able open the case and replace the battery. Make sure to use an screwdriver that has a flathead to keep the plastic from being damaged.

It is a good thing to add a second key in case you only have one that works. You will save money in the end. It's cheaper to purchase an additional key rather than replacing the key fob and you won't need to worry about having it programmed by a dealer.

Replace the SAAB 9-3 Key Fob

In the situation of Saab 9-3 cars that have only one key It's an ideal idea to purchase an additional key as fast as possible. It's not inexpensive to buy the key, but it is cheaper than replacing the entire vehicle. You will need a special tool called Tech2 to add an ignition key. A new CIM module will be required, as well as an ignition that is new. The only key that can be programmed to the car is the latest key.  G28  is not able to be used with another vehicle.

To replace a Saab 9-3 key fob, the owner must call a dealer service department to schedule an appointment to replace the sole car key. The technician will need the unique code for the new key. They could also require replacement of the CIM or TWICE module. Dealers will also have to re-program the ignition cylinders to accept the new key.


Change the battery in the Saab 9-3 key fob is an easy procedure. First remove the emergency key from the fob using an screwdriver with a flat head. Then, insert the screwdriver into a slot located in the middle of the Fob. Gently work it around. After a while, the case should split open, and you can easily access the battery. It is recommended to avoid pouring liquids on the Fob since this could damage the electronic components.